Skip to main navigation Skip to search Skip to main content

Competitive growth of Si and YSi2 phases in a eutectic Si-Y alloy prepared by the Bridgeman method

  • Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

13 Scopus citations

Abstract

A directionally solidified Si-YSi2 alloy was prepared by the Bridgman method at different withdrawal rates. The microstructures of longitudinal section and cross section were investigated. We observed that as the withdrawal rate increased from 0.5 mm/min to 2 mm/min, the morphology of YSi2 phase changed from fine, long strips to islands and finally to blocks distributed along the thick primary Si phase. By calculating the interface growth temperatures of each phase, we found the interface growth temperatures of Si phase and YSi2 phase both decreased with withdrawal rate increasing while that of eutectic structure was almost unchanged. Beyond that the interface growth temperature of Si phase was always higher than that of YSi2 phase. We determined two critical withdrawal rates of VC1= 0.96 mm/min and VC2= 1.57 mm/min. Coupled growth was predominant when the withdrawal rate was slower than VC1 and primary Si phase disappeared. Primary Si phase began to form as the withdrawal rate was greater than VC1 and could be obviously thicker as the withdrawal rate was greater than VC2.

Original languageEnglish
Pages (from-to)13232-13239
Number of pages8
JournalCeramics International
Volume44
Issue number11
DOIs
StatePublished - 1 Aug 2018

Keywords

  • Competitive growth
  • Directional solidification
  • Eutectic
  • Interface growth temperature
  • Si-Y alloy

Fingerprint

Dive into the research topics of 'Competitive growth of Si and YSi2 phases in a eutectic Si-Y alloy prepared by the Bridgeman method'. Together they form a unique fingerprint.

Cite this