Characterization of hot deformation behavior of a new near-β titanium alloy: Ti555211

The deformation behavior of an isothermally compressed Ti555211 titanium alloy was examined by an Arrhenius-type constitutive model using experimental data obtained from hot compression tests; these tests were performed at temperatures and strain rates of 750-950°C and 0.001-1 s^-1, respectively. Activation energies of hot deformation were calculated in 0.05 intervals for strains ranging from 0.1 to 0.7. The respective values of were obtained for the (α + β) and β region. In addition, the predictive capability of the model was described by the average absolute relative error (AARE) and the correlation coefficient (R). The simulated values were compared with the experimental values, and R and AARE of 0.99084 and 6.914%, respectively, were obtained for the Arrheniustype constitutive model. These values were indicative of the good predictive capabilities of the developed straincompensated constitutive equation. Moreover, in this work isothermal compression tests, scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM) were used to systematically investigate the high-temperature deformation behavior of Ti555211 alloy under different processing conditions. EBSD and TEM were used to reveal the substructure and grain orientation of samples of the hot-deformed Ti555211 alloy. The phenomenon of discontinuous yielding was also discussed.