TY - GEN
T1 - An investigation into the influence of processing parameters on the surface quality of AlSi10Mg parts by SLM process
AU - Majeed, Arfan
AU - Lv, Jingxiang
AU - Zhang, Yingfeng
AU - Muzamil, Muhammad
AU - Waqas, Ali
AU - Shamim, Khalid
AU - Qureshi, Muhammad Ejaz
AU - Zafar, Fahad
N1 - Publisher Copyright:
© 2019 IEEE.
PY - 2019/3/13
Y1 - 2019/3/13
N2 - Selective laser melting (SLM) uses powder fusion for the manufacturing of the products in the layer by layer manner. Aluminum alloy AlSi10Mg is broadly used in the aerospace and automotive industry due to its good physical and mechanical features. In this study, we have used different levels of scan speed, laser power and overlap rate for manufacturing of test samples. The aim of the study is to optimize the processing parameters for achieving the best quality products in the additive manufacturing of AlSi10Mg alloy by using SLM technology. A 3-factor, 3-level full factorial Design of Experiments (DoE) with a total of 27 tests, was employed for gathering of experimental data. Finally, we have used the analysis of variance for the optimization of process parameters, and optimized the process parameters for achieving the best surface quality product of AlSi10Mg alloy by SLM process.
AB - Selective laser melting (SLM) uses powder fusion for the manufacturing of the products in the layer by layer manner. Aluminum alloy AlSi10Mg is broadly used in the aerospace and automotive industry due to its good physical and mechanical features. In this study, we have used different levels of scan speed, laser power and overlap rate for manufacturing of test samples. The aim of the study is to optimize the processing parameters for achieving the best quality products in the additive manufacturing of AlSi10Mg alloy by using SLM technology. A 3-factor, 3-level full factorial Design of Experiments (DoE) with a total of 27 tests, was employed for gathering of experimental data. Finally, we have used the analysis of variance for the optimization of process parameters, and optimized the process parameters for achieving the best surface quality product of AlSi10Mg alloy by SLM process.
KW - AlSi10Mg
KW - Optimization
KW - process parameters
KW - Selective laser melting
KW - Surface roughness
UR - https://www.scopus.com/pages/publications/85064124647
U2 - 10.1109/IBCAST.2019.8667175
DO - 10.1109/IBCAST.2019.8667175
M3 - 会议稿件
AN - SCOPUS:85064124647
T3 - Proceedings of 2019 16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019
SP - 143
EP - 147
BT - Proceedings of 2019 16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019
Y2 - 8 January 2019 through 12 January 2019
ER -