Abstract
To improve the conversion efficiency of gallium nitride (GaN) device based DC-DC converter and reduce the shoot-through risk of the high-side and low-side GaN devices, an adaptive dead time control circuit for the GaN device based DC-DC converter is proposed in this paper. A digital control cycle-to-cycle (DCCC) technique based on the combination of a variable delay module and a fixed delay module is used in the circuit. Based on the unique judgment and control methods in the proposed technique, the circuit can achieve adaptive adjustment and approach the optimal dead time value. By adopting a novel voltage reduction circuit, the process feasibility of voltage reduction sampling at switch nodes is improved, and the fast response requirement for dynamic change is satisfied. The 0.18 μm BCD process and the EPC2014C GaN power transistor are adopted to fabricate a buck DC-DC converter for measurement and verification. The measurement results show that under the conditions of 40 V input voltage, 5 V output voltage, 5 A load current, and 6 MHz switching frequency, the circuit exhibits a turn-on dead time T dead_on of 320 ps, and a turn-off dead time T dead_off of 420 ps. The peak efficiency of the proposed adaptive dead time control converter is 90.6%, which is 3.9% higher than the fixed dead time control scheme. The proposed adaptive dead time control circuit possesses the advantages of low dead time and high efficiency.
| Original language | English |
|---|---|
| Article number | 102839 |
| Journal | Integration |
| Volume | 111 |
| DOIs | |
| State | Published - Nov 2026 |
Keywords
- Adaptive dead time
- DC-DC converter
- Efficiency
- GaN
Fingerprint
Dive into the research topics of 'An adaptive dead time control circuit for GaN-based DC-DC converter'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver